To clean, first gently lick the gauze mask with warm water and soap. The bowl-shaped mask can be gently brushed with a soft brush and then washed with water. Please note that you should never use force, because if the latitude and longitude gap of the gauze is too large, the effect of anti-stopping droplets will be lost.
Disinfect, place the cleaned mask in a 2% peracetic acid solution for 30 minutes or boil in boiling water for 20 minutes or in a steamer for 15 minutes, then allow to dry. This method is suitable for gauze masks and bowl masks.
Check, before using again, you should carefully check whether the mask and mask are still intact. For the gauze mask and mask, you can take the light transmission method, that is, take the light before the light to see if there is any obvious light spot, the middle part and the edge part. Whether the light transmittance is consistent or not, if there is any doubt, it is necessary to replace it with a new one. In any case, masks and masks are generally updated after 3 to 7 washes, and masks of exceptional quality can be cleaned 10 times. Activated carbon adsorption masks should pay attention to the regular replacement of the activated carbon interlayer. If the activated carbon interlayer is not replaceable, it should be replaced after 7 to 14 days. This mask can not be used after cleaning.