Four ties on back waist,knitted cuff,hook and loop at back neck.
Sterile,1 pcs/sterile bag,50 pcs/ctn
All inner bag and carton printing can be as your design
SMS 45-65 gsm (comfortable, without glass fibres, latex free.)
Hospital clinical medical personnel and patients.
1,Surgical gown produced under Ultrasonic thermal bonding process,good protective for liquid leak out compare to standard sewing way.Full reinforced with plastic can do blood prevent.
2,With some of the most advanced SMS fabric available, offer a high level of comfort
Dependable protection from five fabric layers, three densely-packed meltblown layers sandwiched between two strong spunbound outer layers , for an excellent barrier against fluids and pathogens
1, Produce samples per customer requirement.
2, Bulk order production exactly per confirmed sample.
3, Purchase raw material and do fabric incoming inspection.
4, Production process inspection.
5, Inspection of finished products before storage.
6, The salesman go warehouse and do final inspection before goods ship.
7, We can do inspection report or online video per customer requirement if you need.
Our normal packing:
2. Carton size:50*28*40cm, as your demands
3. If you buy 1x20GP, the quantity will be 24550pcs
If you buy 1X40HQ, the quantity will be 60250pcs
Non sterile 10pc/bag,100pc/compressed in one carton,
Carton size 56x30x40cm
1x20ft can load around 40900pcs
1x40ft can load around 100400pcs
Packing photos for reference
1. Bend the belt in half along the middle line, in the shared direction. To belt at 1 cm from the fold.
2. To belt (2 PCs) cut to the middle of the back, waist, aligning the notch on the front side of the product.
3. Scribble the belt (2 PCs.) to the bodice of the product, along the waist line, combining the control marks on the front and back side of the product.
4. To vacate sleeve into the open armhole of the product.
5. Sew shoulder seams, simultaneously grinding off the upper sections of the sleeves, align the seams sleeveless.
6. Attach the bake to the cut of the neck of the product, after bending the tape in half. To combine the contact strip with 2 sides on the edge of the neck of the product with the offset from the slices 0.7 cm (right on the inside - tough on the left of the face is soft), turn over the cut of the neck braid, solidification machine stitching pin the ribbon at the beginning and at the end of the line. To equalize the size of the braid along the length with the size of the cut of the neck, to cut the braid.
7. Fold the cuffs in half, the wrong side inside.
8. To attach the cuffs to the sleeves to even the cut parts.